|
The Automatic Rising Bollard sinks into the ground in less than 3 seconds (adjustable) by means of a remote control device (remote control, chip card, digital keypad, etc…), thus clearing the way for traffic and rises back once the vehicle has passed through.
This system is very easy to use and its applications are varied. It enables not only access control to a private housing estate, company grounds or any street, but also gives an answer to urban needs in terms of remote on-line technical centralized supervision.
INFORMATION
• Electro-pneumatic motorization: reliability, simplicity and longevity
• Motivity by compressed low-pressure air
• Very low equipment, installation and maintenance costs
• Several bollards can be operated from the same technical center
(one single electric motor = several access points)
• Distance between technical center / bollards, up to 800 m / 875 yds
• Environmentally friendly (ISO 14 001 standard)
• Installation, easy and quick starting up and tuning
• Fast motion, lowering and rising of bollard are independently adjustable
• No damage for the bollard if a vehicle drives over it while the bollard in motion
|
ADVANTAGES
• Extreme mechanical resistance of the structure and very low maintenance costs (NF P 98.310 standard)
• Rising speed adjustable from 3 to 10 seconds (NF P 98.310 standard)
• Descent by gravity in less than 5 seconds (NF P 98.310 standard)
• Pneumatic upper and lower limit switch buffers built in on electro-pneumatic version
• In case of a power outage, the bollard goes down by gravity : positive security (NF P 98.310 standard) . As an option, negative security is available: the bollard stays up even in case of a power outage (security measures)
• Limit switch captors detect the bollard status: up, down or in motion, to actuate peripherals like : traffic lights, control logic, centralized technical management
• No 220 Voltage inside bollard, meaning no electric shock hazard
• Antifreeze heater enabling operations during the cold of winter (optional)
• Wide range of models, colors, diameters and heights
• Little underground space required
• Generation 6 models are all at ground level when retracted |
Bollards are available in a variety of sizes, styls and colours:
DIAMETER: 120mm - 200mm - 250mm
HEIGHTS: 500mm to 900mm
Capable of withstanding a 1 ton car travelling at 52 mph (dependent on size and model)
View a CRASH TEST video (opens in new window).
We would be pleased to provide a free no obligation quote, just contact us. |
|
